Pulse output instructions
1183
Part IV Tool Instructions
Output variable Data type Function
bError BOOL Refers to an internal mismatch of input values to avoid a PLC
error.
TRUE if the applied channel is not enabled in the system
registers or if bAbsolute is TRUE
Example
In this example the function has been programmed in ladder diagram (LD). Please refer to the
online help for a structured text (ST) example. The same POU header is used for all programming
languages.
DUT
Use the following predefined DUT: PulseOutput_Channel_Configuration_DUT
POU header
All input and output variables used for programming this function have been declared in the POU
header.
To Next Page
Loading...
