Panasonic FP Series User Manual

Table of Contents
25
40.8.7 System registers for FP2/FP2SH/FP10SH .................................................................................1300
40.9 Error codes ......................................................................................................................... 1306
40.9.1 Table of syntax check error .........................................................................................................1306
40.9.2 Table of self-Diagnostic errors ....................................................................................................1307
40.9.3 Table of communication check error ...........................................................................................1311
40.10 Error codes .................................................................................................................... 1312
40.10.1 Error Codes E1 to E8............................................................................................................1312
40.10.2 Self-Diagnostic Error Codes .................................................................................................1312
40.10.3 MEWTOCOL-COM Error Codes...........................................................................................1313
40.11 MEWTOCOL-COM Communication Commands........................................................... 1315
40.12 Hexadecimal/Binary/BCD .............................................................................................. 1316
40.13 ASCII Codes.................................................................................................................. 1317
40.14 Availability of all instructions on all PLC types............................................................... 1318
Index............................................................................................................. 1335
Record of changes

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model