Panasonic FP Series User Manual

Arithmetic instructions
426
Part III FP Instructions
Body
When the variable start is set to TRUE, the function is carried out. The input_value = 0 (+ sign) in
the ARRAY’s first element. 0 represents the whole in the second element, and the value after the
decimal point is 8660. The function thus calculates the output_value = 16#30 (30°).
LD
ST
IF start THEN
F304_BACOS(input_value, output_value);
END_IF;

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model