Panasonic FP Series User Manual

Bistable instructions
510
Part III FP Instructions
FBD
LD
In ladder diagram, specify a rising edge in the contact and SET or RESET in the coil:
ST
When programming with structured text, enter the following:
(*TRUE and FALSE are assigned to Y0*)
IF DF(X0) THEN
Y0:= TRUE;
END_IF;
IF DF(X1) THEN
Y0:= FALSE;
END_IF;

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model