Panasonic FP Series

Conversion instructions
640
Part III FP Instructions
Body
When the variable start is set to TRUE, the function is carried out. The number of bytes to be
converted is entered directly at the contact pin for s2. This programming example is based on the
example for the conversion of a negative number on the main page of F76_A2BIN.
LD
ST
When programming with structured text, enter the following:
IF start THEN
F76_A2BIN( s1_Start:= ASCInput[0] ,
s2_Number:= 6 ,
d=> DataOutput );
END_IF;