Panasonic FP Series User Manual

Conversion instructions
683
Part III FP Instructions
Example
In this example, the same POU header is used for all programming languages.
POU header
All input and output variables used for programming this function have been declared in the POU
header.
Body
When bExecute is set to TRUE, the instruction checks whether the data connected at
s2_AsciiData can be converted when the control string is 'D-16' and the conversion method
16#214.
LD
ST
When programming with structured text, enter the following:
IF DF(bExecute) THEN
F252_ACHK(s1_Control := 'D-16', s2_AsciiData := Adr_Of_VarOffs(Var
:= sString1, Offs := 2), n_ConversionMethod := 16#214);
IF (sys_bIsEQ) THEN
bAsciiDataAreCorrect := TRUE;
END_IF;
END_IF;

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model