Panasonic FP Series User Manual

Data transfer via communication ports
727
Part III FP Instructions
xx = slot number (hexadecimal)
Getting the MCU's Communication Parameters
In this section:
- F161_MRD_PARA (see page 728)
- F161_MRD_STATUS (see page 730)
- Getting in RUN Mode via the Input (X) Flags (see page 732)

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model