Panasonic FP Series User Manual

Data transfer via communication ports
737
Part III FP Instructions

NOTE
For details on the operation of the "reception done" flag, the "transmission done" flag, and the
communication error flag, see page 757.
For details on the format of the da
ta in the send buffer and in the receive buffer, please see "Format of
send and r
eceive
data" on page 745.
Data cannot be sen
t unless the pin CS (Clear to Send) is on. When connecting to a three-wire port,
short-circuit the RS and CS pins.

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model