Panasonic FP Series User Manual

Data transfer within the PLC
815
Part III FP Instructions
No. IEC address Set If
R9007 %MX0.900.7 permanently  the specified address using the
index modifier exceeds a limit.
R9008 %MX0.900.8 for an instant  a number other than 0 to 31 is
specified for the slot number.
Error flags

Panasonic FP Series Specifications

General

Mounting	DIN rail
Type	PLC
Communication Interface	RS-232, RS-485, Ethernet (depending on model)
Input Voltage	100-240V AC or 24V DC (depending on model)
Output Type	Relay, Transistor
I/O Points	Varies by model
Operating Temperature	0°C to 55°C
Dimensions	Varies by model
Weight	Varies by model