Panasonic FP Series

Data transfer within the PLC
864
Part III FP Instructions
Body
If bStoreData changes from FALSE to TRUE, the entire data unit variable
awProcessDataToStore (a DUT containing 11 elements) is filled with the data from File Register
Bank 2 BankOffset 1000.
LD
ST
When programming with structured text, enter the following:
if (DF(bStoreData)) then
WriteDataToFileRegisterBank(BankNumber := 2,
BankOffset := 1000,
DataStartAddress := Adr_Of_Var(awProcessDataToStore),
DataNumberOfWords := Size_Of_Var(awProcessDataToStore));
end_if;