Quantum DXi6900

Chapter 3: FRU Removal and Replacement Procedures
Replacing the Node Integrated Storage Controller Battery
144 Quantum DXi6900 G1 User’s Guide
Replacing the Node Integrated Storage Controller
Battery
This section describes how to remove and replace the battery in the
integrated storage controller in the DXi6900 G1 Node and contains the
following sections:
• Obtaining a Replacement Integrated Storage Controller Battery
• Replacing the Integrated Storage Controller Battery
Obtaining a
Replacement
Integrated Storage
Controller Battery
Before beginning the replacement procedure, make sure that you have
the required replacement kit. The appropriate replacement integrated
storage controller battery will be provided by Quantum Customer
Support (see
Figure 86).
You will need the following items to perform this procedure:
• Replacement integrated storage controller battery kit provided by
Quantum Customer Support.
• ESD grounding wrist strap (included in the replacement kit)
Figure 86 DXi6900 G1 Node
Integrated Storage Controller
Battery
Illustration Description
Replacement battery for
the integrated storage
controller (Dell PERC
H710)
PN 7JTV3