Quantum DXi6900

Chapter 2: Service Menus
Accessing the DXi6900 G1 Service Menu
40 Quantum DXi6900 G1 User’s Guide
the IPMI IP address, or choose to enter customer-specific values. The
User and Password are fixed, and cannot be changed.
Default fields:
• IP - 10.17.21.51
• Netmask - 255.255.255.0
• Gateway - 10.17.21.254
• User - admin
• Password - Qa@Ip00!
To access the Setup IPMI Menu from the Hardware Configuration
Menu:
1 Type the option for Setup IPMI and press <Enter>.
The Setup IPMI Menu displays (See Figure 25 on page 40)
Figure 25 Setup IPMI Menu
*** Service Setup IPMI Menu ***
0) Configure IPMI - Configure IPMI network/user/password Information.
1) Show IPMI - SHow IPMI network/user/password Information.
The Setup IPMI Menu includes the following options:
• Configure IPMI - Use this option to change the IPMI network
settings or return them to system defaults.
Note: Changing the IPMI address changes the iDRAC address
used when connecting to the Node through the IPMI port
(see
Connecting to the System Node Using the iDRAC Port
on page 34).
• Show IPMI - Displays the current IPMI settings and configuration
information.