Chapter 3: FRU Removal and Replacement Procedures
Replacing a Node Processor and Heatsink
154 Quantum DXi6900 G1 User’s Guide
Figure 93 Checking Processor
and Heatsink Status
Removing a Failed Processor and Heatsink
To remove the processor and heatsink from the DXi6900 G1 Node:
WARNING: The heatsink and processor are hot to the touch for some
time after the system has been powered down. Allow the
heatsink and processor to cool before handling them.
1 Shut down the system (see Turning On and Shutting Down the
System on page 23).
2 Remove the Node cover (see Opening and Closing the Node on
page 78).
To Next Page
Loading...
