Chapter 1: Basic Operations
Accessing Remote Management
28 Quantum DXi6900 G1 User’s Guide
Note: To log on as the service user, select Service and enter the
service password. (Contact the system GUI Administrator
for the service password.)
Note: Passwords are limited to 32 characters. Alphanumeric
characters and special characters are allowed. Passwords
can be changed on the Configuration > System >
Security > Access Control page.
4 Click Login.
5 If a security banner message has been specified for the DXi6900 G1,
click Accept.
Note: For information about specifying a security banner
message, see the section “Security Banner” in the Quantum
DXi6900 User’s Guide (6-68159).
The Home page displays (see Figure 18).
Figure 18 Home Page
To Next Page
Loading...
