Quantum DXi6900

Chapter 4: BIOS Settings
Required DXi6900 G1 BIOS Settings
234 Quantum DXi6900 G1 User’s Guide
Required DXi6900 G1 BIOS Settings
The DXi6900 G1 system board BIOS settings must be set to the required
values for correct system operation.
Note: Check CSWeb (https://csweb.quantum.com) for the latest
hardware specification with required BIOS settings.
To verify the DXi6900 G1 BIOS settings:
1 As the system boots, press F2 to display the System Setup Main
Menu.
2 Select System BIOS and press <Enter>.
3 Verify that all BIOS settings are set to the Quantum required value,
and make any changes as needed (see
Tab le 17).
Note: Required values that differ from the default values are
shaded yellow. Pay close attention to these fields.
4 Press <ESC> to exit the BIOS, and save any changes.
Note: To verify iDRAC BIOS settings are correct, see Verifying iDRAC
Settings on page 171.
Table 17 DXI6900 G1 Required
BIOS Settings
BIOS Field Name Values (Default First) Quantum Required Value
Memory Settings
System Memory Size 128.0 GB 128.0 GB / 256.0 GB
System Memory Type ECC DDR3 ECC DDR3
System Memory Speed 1866 MHz 1866 MHz
System Memory Voltage 1.5V/1.35 1.5V/1.35
Video Memory 16MB 16MB