Quantum DXi6900

Chapter 1: Basic Operations
DXi6900 G1 Array and Expansion Modules
16 Quantum DXi6900 G1 User’s Guide
Figure 10 Array and Expansion
Module LED Indicators – Front
Panel
Table 4 Array and Expansion
Module LEDs and Buttons
Enclosure locate
Service action required
Over temperature
Power
Standby power
Button/LED Description
Enclosure locate
(white)
Indicates the location of the enclosure
within the system.
Service action required
(amber)
Indicates at least one of the components
within the enclosure has detected a fault.
Over temperature
(amber)
Indicates the environmental temperature
has reached an unsafe level.
Power (green) Indicates the enclosure has main power.
Standby power (green) Indicates that the enclosure is in standby
mode.