Radwin 2000 - Figure 8-11 Services and Rates

RADWIN2000UserManual Release2.8.30 8‐14
Configuration
Figure8‐11:ServicesandRatesdialog
TochooseServices,seethecorrespondingInstallationprocedureinChapter6.
Ifyouareusingalinkthat‐
• isnon‐collocated
• isEthernet‐only
• usesmodelRADWIN2000CODUs
thenyoumayuseAs ymmetricAllocation.Youmaychangethecapacityallocationherethe
samewayasduringinstallation.InplaceoftheIDUboxinFigure8‐11,youwillseethe
AsymmetricAllocationslider:

TheproceduresforsettingtheJitterBufferandHotStandbyparametersarealsothesameas
thecorrespondingproceduresinChapter6.
ClickNexttocontinue.