Radwin 2000 - Performance Monitoring

RADWIN2000UserManual Release2.8.30 10‐10
PerformanceMonitoring
2.ClickYestocontinue.TheEthernetservicesareachangesappearanceandthe
estimatedthroughputisdisplayed:
Attheendof30seconds,thedisplayrevertstonormal.
PerformanceMonitoring
RADWIN2000PerformanceMonitoringconstantlymonitorstrafficovertheradiolinkand
collectsstatisticsdatafortheairinterface,TDMandEthernetports.Itdoessocont inuously,
evenwhentheRADWINManagerisnotconnected.
Twotypesoflogsarerecorded:
• MonitorLogthatrecordsstatisticsontrafficrateandradiosignalstrength.
•EventsLogthatrecordswhentheratesfallaboveorbelowapredefinedthreshold.See
page10‐16below.
BoththestatisticsMonitorlogandeventslogcanbesavedastextfiles.
TheMonitorLog
TheMonitorLogrecordsperformancestatisticsforpredefinedintervals.Youcansavethe
monitorlogtoatextfile,aswellasdisplaytheinformationinanon‐screenreport.
SavingtheMonitorLog
YoucansavetherecordedMonitorLogstatisticstoatextfile.
 Tosavethemonitorlog:
1. FromtheToolsmenu,choosePreferences.
ThePreferencesdialogboxappears: