Radwin 2000 - Chapter 23: Changing the Factory Default Band; Why this Is Needed; Required Equipment; The Procedure

RADWIN2000UserManual Release2.8.30 23‐1
Chapter23:
ChangingtheFactoryDefault
Band
WhythisisNeeded
AllODUssuppliedbyRADWINcomewithpreconfiguredwithafactorydefaultproduct‐
dependentbandaccordingtotheODUpartnumber.
ForODUssupportingMulti‐band, itmaybechangedusingtheprocedureinthischapter.The
procedureisgeneric,applyingtoallODUswiththeMulti‐bandfeature.
RequiredEquipment
TheminimalequipmentrequiredtochangeanODUdefaultbandis:
• Laptopcomputer(managingcomputer)satisfyingtherequirementsofTable5‐1.
• AninstalledcopyoftheRADWINManager
• APoEdevice
• AnEthernetLANcable
• AnIDU‐ODUcable
Theprocedure
Caution
• Ifforsomereasonthedefaultbandneedstobechanged,itshouldbe
donebeforelinkinstallation.
• Useofanincorrectbandmaybeinviolationoflocalregulations.
Note
Thefo llowingprocedureisgenerictoallrelevantRADWINradioproducts.
WhatyouseeonyourrunningRADWINManagermaydifferinsomedetails
fromthescreencapturesusedtoillustratethischapter.