Radwin 2000 - Mixing Hssoe and SHSS Enabled Odus; Figure 13-4 Site Configuration

RADWIN2000UserManual Release2.8.30 13‐11
MixingHSSoEandSHSSenabledODUs
Figure13‐4:SiteConfiguration:HSSoE‐Top‐client,Bottom‐master
TheDetailsbuttoninthe(bottom)HSMwindowoffersalistofcollocatedclients.
MixingHSSoEandSHSSenabledODUs
ODUsusingbothHSSstylesmaybecollocatedasfollows:
 TocollocateHSSoEandSHSSODUs:
1.EnsurethattheHSSoEmasteralsosupportsSHSS.(ItwillhaveaSyncport.)
2.ConnecttheHSSoESyncportoftheHSSoEmastertothefirstportoftheHSSunit.
3.ConfiguretheHSSoEmastertosupportbothSerialandEthernetHSSasshown:
4.EnsurethatallothercollocatedODUsareconfiguredasclientsasdescribedabove
(HSSoE)andinChapter12(SHSS).