Radwin 2000 - Figure 28-3 Siteb

RADWIN2000UserManual Release2.8.30 28‐4
RunningSpectrumView
Figure28‐3:SiteB(over‐the‐airsite)done,showingcurrentchannel
TheanalysiscompletewhentheStartAnalysisbuttonrevertstogreen.Itneverruns
forlongerthanthetimeoutvalueandyoumaystopitanytimebyclickingthered
StopAnalysisbutton.
Theresultsfortheover‐the‐airsitearedisplayedafterthelinkisre‐established
regardlessofwhethertheanalysiscompletesbyitselforwasstopped.
Note
Ifyouareusingahighresolutionlicensedband,theStopAnalysisbutton
worksdifferently:Itwillhalttheanalysisofthemanagedsite(SiteA),butit
willnothaltanalysisoftheover‐the‐airsite(SiteB).Youshouldtherefore
ensurethatthetimeoutvalueisnottoohigh.