Radwin 2000 - Appendix D: MIB Reference; Introduction

RADWIN2000UserManual Release2.8.30 D‐1
AppendixD:
MIBRef erence
Introduction
AbouttheMIB
TheRADWINMIBisasetofAPIsthatenablesexternalapplicationstocontrolRADWIN
equipment.
TheMIBisdividedintopublicandaprivateAPIgroups:
• Public:RFC‐1213(MIBII)variables,RFC‐1214(MIBII)SystemandInterfacessections
•Private:ControlledbyRADWINandsupplementsthepublicgroup.
ThisappendixdescribesthepublicandprivateMIBusedbyRADWIN.
Terminology
Thefollowingtermsareusedinthisappendix.
Inaddition,theMIBusesinternally,theoldernotionsofLocalsiteandRemotesitewhere
thismanualwouldusesiteAandsiteB.
Toavoidburdeningthereader,thisappendixwillfollowtheMIBusage.
Term Meaning
MIB ManagementInformationBase
API ApplicationProgrammingInterface
SNMP SimpleNetworkManagementProtocol