Radwin 2000 - Chapter 9: Site Configuration; Configuring the Site

RADWIN2000UserManual Release2.8.30 9‐1
Chapter9:
SiteConfiguration
TheSiteConfigurationdialogpanelsareusedtoconfigureparameters,whichmaydiffer
betweenbothsidesofthelink.
TheparametersconfiguredusingtheSiteConfigurationdialogpanelsinclude(amongothers):
• Systemsettings
• Airinterface‐Transmit(Tx)powerandantenna
• HubSiteSynchronization status
• NetworkmanagementincludingVLAN
• Inventory‐linkhardwareandsoftwaremodeldetails
• Securitysettings
• Dateandtime
• Ethernetservicesettings
• TDMHotStandbystatus
• Externalalarmssettings
• Operations‐Reverttofactorysettings
TheOperationsdialogoffersa“doorway”tojumpintoinstallationmode.
TheSiteConfigurationdialoghasitsownmainmenuwiththefollowingextrafunctionality:
• BackupODUsoftware
• RestoreODUsoftwareorconfigurationfromabackupfile
• Refreshthecurrentpanel
• Enable/disablethesiteODUbuzzer
• Jumpbackintoinstallationmodekeepingcurrentconfigurationsettings
ConfiguringtheSite
EditingtheConfigurationParametersbySite
Youcanedittheconfigurationparametersforeachsiteindividually.Thefollowingfunctions
areavailablefromtheleftsideofthedialogbox.