Radwin 2000 - Figure 10-7 Local Line Loopback; Figure 10-8 Remote Reverse

RADWIN2000UserManual Release2.8.30 10‐7
RemoteReverseLoopback
Figure10‐7:LocalLineLoopback
RemoteReverseLoopback
Aremotereverseloopbackcanbesettotestconnectionbetweenthelocalandremoteunits
andbetweenthelocalE1/T1portanditsco nnectiontothelocaluserequipment.Inthis
mode,datacomingfromthelocaluserequipmentisloopedbackattheremoteside.This
loopbackisinitiatedfromamanagingcomputerconnectedtothelocalunit.
Figure10‐8:RemoteReverseLoopback
RemoteLineLoopback
TheremoteunitcanbesettoalineloopbacktotesttheremoteE1/T1portandits
connectiontotheremotesideuserequipment.Inthismode,datacomingfromtheremote