Radwin 2000 - Adapter

RADWIN2000UserManual Release2.8.30 4‐18
InstallingaLink

Figure4‐28:SmallformfactorODU‐Rear,metaltie
Themountingtiesarethreadedthroughthemountingslotsprovidedandtheunitmounted
onapole.
U
Figure4‐29:Mountingadapter
ThemountingadapterisusedwiththestandardmountingkitshowninFigure4‐19.Itisnot
includedintheODUpackageandmustbeorderedseparately.
 TomountasmallformfactorODUusingamountingkit:
1.ReferringtoFigure4‐30below:Securetheadapter(3)totherearoftheODU(2)
usingthetwoscrewsprovided(4).UseaPhillipsscrewdriversettoatorqueof2.0
NM.
Table4‐2:MountingadapterkitforsmallformfactorODUs
Item
No.
Description Quantity
1 Metalties 2
2 Mountingadapter 1
3
ScrewM5x10,CSK,Phillips,
stainlesssteel
2