Radwin 2000 - Table 17-1 Port Settings - I; Table 17-2 Port Settings - E

RADWIN2000UserManual Release2.8.30 17‐4
PortFunctionality
IngressDirection
EgressDirection
Table17‐1:Portsettings‐Ingressdirection
Transparent
Theport‘doesnothing’withregardtoVLANs‐inboundframesareleftuntouched.
Tag
FramesenteringtheportwithoutVLANorQinQtaggingaretaggedwithVLANIDand
Priority
a
,whicharepreconfiguredbytheuser.Frameswhicharealreadytaggedat
ingressarenotmodified.
a. PriorityCodePoint(PCP)whichreferstotheIEEE802.1ppriority.Itindicatestheframepriority
levelfrom0(lowest)to7(highest),whichcanbeusedtoprioritizedifferentclassesoftraffic
(voice,video,data,etc).
Table17‐2:Portsettings‐Egressdirection
Transparent
Theport‘doesnothing’withregardtoVLANs‐outboundframesareleftuntouched.
Untagall
Allframesareuntagged.