Radwin 2000 - Table 5-3 Default Andi

RADWIN2000UserManual Release2.8.30 5‐10
DefaultRADWIN2000Settings
DefaultRADWIN2000 Settings
ThedefaultsettingsoftheRADWIN2000configurationparametersarelistedinthesecond
columnofTable5‐3below.Thethirdcolumnshowsthevaluesweuseinthismanualfor
illustrativepurposes.
Table5‐3:DefaultandIllustrative Settings
Parameter DefaultValue IllustrativeValue
Factorydefaultband
Product
dependent
5.820GHz
ODUIPAddress 10.0.0.120 10.104.2.2and4
SubnetMask 255.0.0.0 255.255.0.0
DefaultGateway 0.0.0.0 10.104.10.21
Trapdestination 0.0.0.0 0.0.0.0
RADWINManagerlog‐on
passwords
Observer admin
Operator admin
Installer wireless
LinkID Link EBG_20561334
LinkName Name TPSF_BTT
Site1 Site A
Site2 Site B
Location(persite) Location A B
Name(persite) Name Here There
Contact(persite) Person John Mary
LinkPassword wireless‐bridge
Rate Adaptive
EthernetConfiguration AutoDetect
RadioLinkFailureActions Noaction
BridgeorHubmode HubMode,Agingtime=300sec
Protocol SNMPv1 SNMPv1(maybev1,v3orboth)
Communityvalues
Read‐write–netman
Read‐only–public