Radwin 2000 - Figure 9-2 Changing Thea

RADWIN2000UserManual Release2.8.30 9‐5
ChangingtheTransmitPower
Figure9‐2:ChangingtheAntennaTypeandTransmitPower
TheAntennaConnectiontypereflectstheinstalledODU.Inourexample,weareusingan
externalantennaonaRADWIN2000CODU,sothefirsttwofieldsaresetandgrayedoutas
shown.IfyouhaveaconnectorizedRADWIN2000Amodel,youwillbeabletoswitch
betweenexternalandintegratedantennas.
Theantennatype(Dual,Single)mayonlybechangedifyouaccesstheODUbyLocal
Connection.
FordetailedexplanationabouttherelationshipbetweentheTxpower,antennagainand
cablelossparameters,seeInstallation,Step4..
Caution
ChangingtheTxPowerwillaff ectservicequality.Thesameconsiderations
applyhereaswerenotedintheInstallationprocedure,Step4.