Radwin 2000 - Hardware Installation Workflow for a RADWIN 2000 Link

RADWIN2000UserManual Release2.8.30 4‐14
HardwareInstallationWorkflowforaRADWIN2000Link
HardwareInstallationWorkflowforaRADWIN
2000Link
InstallingaLink
SiteSurvey
TheSiteSurveyiscarriedoutasdescribedinSiteSurvey.RecallthattheSiteSurveyhasthree
mainsteps:
• Stage1:PreliminarySurvey
• Stage2:PhysicalSurvey
• Stage3:RFSurvey
Sitepreparation
SitePreparationincludes‐
• Obtaininganynecessarylegalandstatutorypermitsforinstallationofradioequipment
• Clearingphysicalobstructionsasfaraspossible
• Erectingamastortowerifrequired.Amast ‐sitedODUtypicallyuses apoleattachedto
themast.
• Installingapoleonabuildingwallifrequired
• Constructingaweather‐proofcabinettohouseaPoEdeviceorotherIDUifitisnotto
behousedindoors
• Ensuringavailabilityofpower,typicallystandardlocalACpower
• EnsuringthatthereisaLANcableinplacefromtheuser’sswitchtothePoE/IDUloca‐
tion