Radwin 2000 - Page 161

RADWIN2000UserManual Release2.8.30 9‐9
ConfiguringIPAddressesforTrapDestinations
ConfiguringIPAddressesforTrapDestinations
 ToenteraTrapDestination:
1.IntheTrapDestinationtable,doubleclickalinetobeedited.Thefollowingentrywin‐
dowisdisplayed:
2.EntertheTrapDestinationIPAddressandPort.ItcouldbetheIPaddressofthe
managingcomputer.Theeventslogwillbestoredattheaddresseschosen.
3.ForSecuritymodelyoumaychoosebetweenSNMPv1orSNMPv3.Thechoiceissite
dependent.IfyouchooseSNMPv1,youmayonlyenteranIPaddressandport
number.ForSNMPv3,youshouldsupplyausernameandpassword:
4.ClickOKtosaveyourchoice.Hereistheresult: