Radwin 2000 - Page 297

RADWIN2000UserManual Release2.8.30 16‐11
UsingRADWINManagertoSetupaRing
ALink‐IdlemessageisdisplayedontheEthernetServicesBar:
WhentheRPLcutsinasaresultofafailure,the“Ethernet(Blocked)”noticedisap‐
pears.TheEthernetServicesBarindicatedthattheRPLisactive:
Uponrestorationofthebrokenlink,theRPLreturnstoidlestatuswiththeappropri‐
ateindicationsontheRADWINManagermainwindow.
Onthestatusbarforallringmemberlinks,youwillseetheringmembershipindica‐
toricon:
Caution
• DonotconfiguremorethanoneRPL.Ifyoudo,youwill breaktheRing
• IfyouforgettoconfigureoneRPLinaRing,youwillintroducealoop
intoyournetwork