Tray Paper Settings
112
3
❖ Paper Type: Tray 5
• The main and sub-machines follow their respective set values.
• In combined copying, only the paper tray corresponding to the paper size,
orientation, and type that are set in common on the main and sub-ma-
chines can be used. To make the most of the combined copying function, it
is advisable that you make the same paper settings on both the main and
sub-machines.
❖ Paper Type: Tray 6
• The main and sub-machines follow their respective set values.
• In combined copying, only the paper tray corresponding to the paper size,
orientation, and type that are set in common on the main and sub-ma-
chines can be used. To make the most of the combined copying function, it
is advisable that you make the same paper settings on both the main and
sub-machines.
❖ Paper Type: Tray 7
• The Tray 7 on both of the main and sub-machines utilizes only for the cov-
er sheet and the designation sheet.
❖ Paper Type: Interposer Upper - Lower
• The main and sub-machines follow their respective set values.
• In combined copying, only the paper tray corresponding to the paper size,
orientation, and type that are set in common on the main and sub-ma-
chines can be used. To make the most of the combined copying function, it
is advisable that you make the same paper settings on both the main and
sub-machines.
To Next Page
Loading...