Guide to Components
11
1
Options
This section introduces the names and functions of main optional parts.
External Options
This section provides explanations about external options.
1. Finisher SR5000
Sorts, stacks, staples and punches copies.
*1: Finisher upper tray
*2: Finisher shift tray
2. Booklet Finisher BK5000
The saddle stitch function can staple the
copies in the centre and fold them into
booklets.
*1: Finisher booklet tray
3. Z-folding unit
Makes two parallel folds on the copied
paper, one of which faces in and the other
facing out.
4. Interposer
Inserts cover or slip sheets into the copies.
5. A3/11" × 17" tray unit
You can load A3L or 11" × 17"L paper
in tray 1 using this unit.
6. Multi bypass tray (Tray 7)
Use when copying or printing onto a
thick paper, OHP transparency, and cus-
tom size paper.
7. Wide Large Capacity Tray (Wide
LCT)
Holds 4,400 sheets of A3 or 11" × 17" sized
paper.
8. Large Capacity Tray (LCT)
Holds 5,000 sheets of paper.
Note
❒ The punch function is not available for Type 3.
APG009S
To Next Page
Loading...