Ricoh MP9000 - Log off (Using the Control Panel)

If User Authentication is Specified
67
2
D Enter a login password, and then press [OK].
E Press [Login].
When the user is authenticated, the screen for the function you are using ap-
pears.
Log Off (Using the Control Panel)
Follow the procedure below to log off when Basic Authentication, Windows Au-
thentication, or LDAP Authentication is set.
A Press the {Login/Logout} key.
B Press [Yes].
APG012S
BelliniC3-EN_Sec_F_FM_forPaper.book Page 67 Friday, December 16, 2005 9:16 AM