Copier Functions
139
2
L Place originals, and then press the {Start} key.
Reference
“Tray Paper Settings”, General Settings Guide.
Slip Sheets
Every time an original page changes, a slip sheet is inserted. This function can
be used to automatically insert a slip sheet between OHP transparencies, or as a
stacking function.
You can also copy onto slip sheets.
Important
❒ If [1 Sided→2 Sided] is set, change it to [1 Sided→1 Sided].
❖ When placing OHP transparencies in the multi bypass tray
•Copy
•Blank
To Next Page
Loading...