Turning On the Power
25
1
Turning Off the Main Power
Turn off the main power as follows:
Important
❒ Do not turn off the main power switch when the On indicator is lit or blink-
ing. Failure to observe this may result in damage to the hard disk or memory,
leading to malfunction.
❒ Be sure to pull out the power cord only after you have turned off the main
power switch. Not doing this may result in damage to the hard disk or memory.
A Make sure the On indicator is not lit.
B Open the switch cover, and turn off the main power switch.
The main power indicator goes off.
Note
❒ The On indicator does not go off, but blinks in direct dialing mode even if
you press the Operation switch. When this happens, check the items below,
and turn off the main power switch.
• the computer is not controlling the machine.
To Next Page
Loading...