Copying
86
2
Note
❒ You can erase a 3 mm (0.1 inch) boundary magazine around all four edges
of originals in Combine mode.
❒ You can set the copy order in Combine mode.
Reference
p.79 “Originals and copy orientation”
“Edit”, General Settings Guide
Series Copies
This function copies the front and back of a two-sided original separately, or the
two facing pages of a bound original onto two sheets.
There are two types of Series Copies.
Important
❒ You cannot use the Series Copies function with the ADF.
❒ The following table shows the paper sizes of two facing pages of a bound
original (book) and one-sided copy (when copying at a ratio of 100%).
❖ Metric version
❖ Inch version
AMA020S
AMA027S
To Next Page
Loading...