Copying
54
2
Note
❒ If the direction in which your original is placed (K or L) is different from
that of the paper you are copying onto, this function rotates the original
image by 90° and fits it on the copy paper (rotated copy).
❒ The rotated copy function works when [Auto Paper Select] or [Auto Reduce /
Enlarge] is selected. See “Auto Paper Select” and “Auto Reduce/Enlarge”.
❒ The default setting for Auto Tray Switching is [With Image Rotation]. You
cannot use the Rotated Copy function if this setting is changed to [Without
Image Rotation] or [Off]. See “Auto Tray Switching”, General Settings Guide.
❒ When using Finisher SR5000, you cannot use the Rotated Copy function if
Slant, Top 2, Left 2 or Center for stapling, Punch, or Z-fold is selected.
Reference
p.43 “Copying from the Multi Bypass Tray”
p.58 “Auto Reduce/Enlarge”
p.69 “Staple”
p.72 “Punch”
“Copier/Document Server Features”, General Settings Guide
Preset Reduce/Enlarge
Reduces or enlarges images. You can select a preset ratio for copying.
GCROTA0E
To Next Page