Ricoh MP9000 - Thin Mode

Placing Originals
24
1
Note
❒ If [Mixed Sizes] is not displayed on the screen, set [Mixed Sizes] with [Special
Original Display Defaults]. See “Copier/Document Server Features”, General
Settings Guide.
Reference
“Copier/Document Server Features”, General Settings Guide
Thin Mode
A Press [Thin Paper].
B Place the original, and then press the {Start} key.
Note
❒ If [Thin Paper] is not displayed on the screen, set [Thin Paper] with [Special
Original Display Defaults]. See “Copier/Document Server Features”, General
Settings Guide.
Reference
“Copier/Document Server Features”, General Settings Guide