Ricoh MP9000 - Removing Punch and Staple Waste; Finisher

To Next Page

To Previous Page

Clearing Misfeeds

108

Removing Punch and Staple Waste

This section explains how to remove punch and staple waste.

Note

❒ While “Hole Punch Receptacle is full.” or “Waste Staple Recepta-

cle is full.” is displayed, you cannot use the Punch function or the Staple

function.

Finisher

The following procedure explains how to remove punch and staple wastes from

the Finisher.

• Remove punch wastes

• Remove staple wastes

Note

❒ If the message is still displayed, reinstall the waste box.

ANR025S

ANR024S