Ricoh MP9000 - Using NCP to Connect

Registering Addresses and Users for Scanner Functions
212
7
J Press [Exit].
Note
❒ To delete a name entirely, see “Deleting a Registered Name”.
Reference
p.186 “Deleting a Registered Name”
Using NCP to Connect
Note
❒ To register a shared folder configured in Windows, see “Using SMB to Con-
nect”
❒ To register a folder in an FTP server, see “Using FTP to Connect”
Reference
p.200 “Using SMB to Connect”
p.207 “Using FTP to Connect”
Registering a Folder
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program/Change] is selected.
E Press the name you want to register or enter the registered number using
the number keys.
You can search by the registered name, user code, folder name, or e-mail address.
F Press [Auth. Info], and then press [Next].
G Press [Specify Other Auth. Info] on the right side of Folder Authentication.
H Press [Change] under Login User Name.