Ricoh MP9000 - To Select the Ratio with [O] and [N]

Copier Functions
57
2
To select the ratio with [o] and [n]
Select a ratio using [o] or [n].
A Press [Reduce/ Enlarge].
B Select a preset ratio which is close to the desired ratio.
C Specify the ratio using [o] or [n].
Pressing [o] or [n] changes the ratio in increments of 10%. Pressing and
holding down the relevant key changes the ratio in increments of 10%.
D Press [OK].
E Place the originals, and then press the {Start} key.
Note
❒ If you have incorrectly entered the ratio in
C
, readjust it with [o] or [n].
To enter the ratio with the number keys
Select a ratio using the number keys.
A Press [Reduce/ Enlarge].
B Press [Number keys].
C Enter the desired ratio with the number keys, and then press the {q} key.
D Press [OK] twice.