Placing Originals
21
1
Reference
p.21 “Batch mode”
p.22 “SADF mode”
p.23 “Mixed size mode”
p.24 “Thin Mode”
p.26 “Custom sizes”
Batch mode
In Batch mode, the machine copies an original of more than 100 pages as one
document, even if it is placed on the ADF in parts.
Important
❒ Place special originals, such as translucent paper, one by one.
A Press [Batch].
B Place the first part of the original, and then press the {Start} key.
C After the first part of the original has been fed, place the next part, then
press the {Start} key.
Note
❒ If [Batch] is not displayed on the screen, set [Batch] with [Special Original Dis-
play Defaults]. See “Copier/Document Server Features”, General Settings
Guide.
❒ When [SADF] is displayed in step
A
, set [SADF] with [Special Original Display
Defaults]. See “Copier/Document Server Features”, General Settings
Guide.
❒ To copy subsequent originals in this mode, repeat step
C
.
❒ When the Sort, Combine or 1 Sided→2 Sided mode has been set, press the
{q} key after all originals have been scanned.
Reference
“Copier/Document Server Features”, General Settings Guide
To Next Page
Loading...