Authentication Information
189
7
Changing a User Code
Following describes the procedure for changing a registered user code.
Important
❒ Even if you change a user code, the counter value will not be cleared.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program/Change] is selected.
E Select the user whose user code you want to change.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, user code, folder name, or e-mail address.
F Press [Auth. Info].
G Press [Change], and then enter the new user code using the number keys
H Press {#} key.
I To change the available functions, press [Auth. Info] and then press [TNext]
twice.
To Next Page
Loading...