Ricoh MP9000 - Placing Originals on the Exposure Glass

To Next Page

To Previous Page

Placing Originals

Placing Originals on the Exposure Glass

Place originals on the exposure glass.

Important

❒ Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or

be damaged.

A Lift the ADF.

Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the

original might not be detected correctly.

B Place the original face down on the exposure glass. The original should be

aligned to the rear left corner.

Start with the first page to be copied.

A Positioning mark

B Left scale

C Lower the ADF.

Note

❒ When you place originals on the exposure glass, you can specify the way

copies are delivered.

Reference

“Input/Output”, General Settings Guide.

APF022S