Ricoh MP9000 - Page 314

Appendix
244
9
❖ Set Fusing Temparature
❖ 1–740–001 : Set Fusing Temparature
• 1: Raise temperature to improve fusing
• 2: Lower temperature to reduce curl
❖ Double-Feed Detection
❖ 1-908-001 : Tray 1
•0: Off
•1: On
❖ 1-908-002 : Tray 2
•0: Off
•1: On
❖ 1-908-003 : Tray 3
•0: Off
•1: On
❖ 1-908-004 : Tray 4 (LCT Tray 1)
•0: Off
•1: On
❖ 1-908-005 : Tray 5 (LCT Tray 2)
•0: Off
•1: On
❖ 1-908-006 : Tray 6 (LCT Tray 3)
•0: Off
•1: On
❖ 1-908-007 : Tray 7 (Bypass Tray)
•0: Off
•1: On
❖ 1-908-008 : After Double-Feed Detection