Protection Using Encryption
141
5
Creating and Installing the Self-Signed Certificate
Create and install the server certificate using Web Image Monitor.
This section explains the use of a self-certificate as the server certificate.
A Open a Web Image Monitor.
B Enter “http://(machine's-address)/” in the address bar to access the printer.
C Log onto the machine.
The network administrator can log on.
Enter the login user name and login password.
D Click [Configuration], under [Security], click [Device Certificate].
E Click [Create].
F Make the necessary settings.
Reference
For details about the displayed items and selectable items, see Web Image
Monitor Help.
G Click [OK].
The setting is changed.
H Click [OK].
A security warning dialog box appears.
I Check the details, and then click [OK].
[Installed] appears under [Certificate Status] to show that a server certificate for
the printer has been installed.
J Log off from the machine.
Note
❒ Click [Delete] to delete the server certificate from the machine.
BelliniC3-EN_Sec_F_FM_forPaper.book Page 141 Friday, December 16, 2005 9:16 AM
To Next Page
Loading...