Placing Originals
27
1
Note
❒ If [Original Size] is not displayed on the screen, set [Original Size] with [Special
Original Display Defaults]. See “Copier/Document Server Features”, General
Settings Guide.
❒ If you make a mistake in step
C
or
D
, press [Clear] or the {Clear} key, and
then enter the value again.
❒ To register the custom size you have entered, press [Program]. A confirma-
tion message appears. Press [Yes]. Press [Recall] to specify a registered cus-
tom size.
Reference
“Copier/Document Server Features”, General Settings Guide
To Next Page