Connecting the Machine
16
1
Note
❒ IPv6 can be used only for the printer function.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when optional wireless LAN board is installed. If Eth-
ernet and IEEE 802.11b (wireless LAN) are both connected, the selected inter-
face has priority.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for using Printer with IEEE 1394 inter-
face cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Note
❒ [IEEE 1394]appears when optional IEEE 1394 interface board is installed.
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
interface settings/Network Machine Name As required
Heading Setting Item Setting Requirements
interface settings/IEEE 1394 IPv4 Address Mandatory
interface settings/IEEE 1394 DDNS Configuration As required
interface settings/IEEE 1394 Host Name As required
interface settings/IEEE 1394 Domain Name As required
interface settings/IEEE 1394 WINS Configuration As required
interface settings/IEEE 1394 IPv4 over 1394 Mandatory
interface settings/Network IPv4 Gateway Address As required
interface settings/Network DNS Configuration As required
interface settings/Network Effective Protocol Mandatory
Heading Setting Item Setting Requirements
To Next Page
Loading...