Using Connect Copy
161
3
Note
❒ Some documents may not be displayed, depending on the security func-
tion settings.
❒ To change the printing order, press the highlighted documents to cancel
your selection. Select again in the desired order.
❒ You can also cancel all your selections by pressing the {Clear Modes} key.
❒ To register new print conditions or numbers of copies in step
D
, press [Save
Print Settings].
❒ If you are selecting multiple files, you can check the file names and print-
ing order by pressing [T] and [U] to scroll through the list.
❒ Press [Select File] to return to the Select Files to Print display.
❒ If you have entered a wrong value, press the {Stop} key and enter again.
❒ When using the Sort function, you can check the print results by making a
sample copy on the main machine. See “Sample copy”.
❒ Sample copies can be made on the main machine only.
❒ The main machine begins printing from the document stored in the Docu-
ment Server. Printing on the sub-machine starts when the document is
transferred from the main machine.
❒ To stop the printing, press the {Stop} key on the main machine, and then
follow the instructions on the display.
❒ The number of copies might differ on the main and sub machines.
❒ Both machines may not finish printing at the same time.
Reference
p.65 “Sample copy”
To Next Page
Loading...